0%

Digital video surveillance has been available for a long time, but the cameras and recording systems of the past were clunky and difficult to use. However, with the advancement of cameras, new video management softwares is now available to supplement your CCTV systems for remote monitoring through the internet, email alerts, motion detection, and other functions. This is because video management software improves the security of your property by providing you with an overview of what is going on at any given time. You may also use it to dissuade crime by putting live footage on screens throughout the facility or on assets such as ATMs or gas stations, which are frequently targeted for robbery.

Many companies today are also turning to video management softwares for their security and safety solutions as it can provide insights into what happens on an asset’s grounds at any given moment. It also encourages workers to be more proactive in asset management, while also increasing safety and security levels throughout the firm. With video management software, you can find out who is at your gate or who is entering your parking garage with a few clicks! Similarly, Hikvision's iVMS 4500 video management software allows its end-users to remotely monitor their premises from anywhere in the world. If you're wondering why it's the market's leading software, go no further. Here's an explanation of what iVMS is? How should it be used? And a lot more!

What is iVMS 4500?

The iVMS 4500 is a top-of-the-line video management software designed for small to medium enterprises (SMEs) and distributed enterprise locations requiring onsite monitoring and surveillance. Building on the success of its predecessor, the iVMS 4500 offers new features that include: enhanced recording capabilities, high definition display support, real-time video preview of up to 16 channels as well as swipe for PTZ control and camera movement with support for preset activation and configuration along calibration brightness. It also provides management of up to 256 sets of devices and device profiles can be easily added, deleted and modified using iVMS 4500.

Moreover, with iVMS-4500 you can monitor the status of all your cameras from anywhere in the world using a PC, Mac or smartphone. The user-friendly interface allows users without prior experience of IP network systems to quickly and easily set up their own surveillance system with just a few clicks. Besides, iVMS-4500 is widely used in prisons, schools and factories. Its app brings users an unprecedented mobile operation experience. With the app, you can easily access network cameras anytime and anywhere as long as your smartphone has an undisturbed network connection. Thus there’s no doubt that the iVMS 4500 is an impressive tool for recording, viewing and managing video surveillance. It offers several advantages including a streamlined interface and playback capability.

How to connect iVMS 4500 to mobile?

Mobile is not only the new trend but also a must-have in the security industry. It's no longer news that businesses and individuals are connected on the go, which has led to an increase of demand for mobile surveillance solutions. Thus, to connect iVMS 4500 and remotely monitor your video feeds from a mobile device, you need to follow the mentioned steps. Begin by downloading the free Hikvision iVMS 4500 lite app from the Google Play or Apple app stores. This software is compatible with both Android and Apple phones and tablets. Then, in the top left, open the app and hit the Menu button, which is three little lines inside a circle. Following that, a menu list will display. Choose Devices from the drop-down menu, and a list of available devices will display. If this is your first time using the app, a preset 'demo' device will show. To add your own, click the Plus icon in the upper right corner. After that, enter device information and click the Save button. Finally, at the bottom of the page, hit the Start Live View button to begin watching your cameras. Check your settings and make sure you have an internet connection if Start Live View does not show.

How to set up iVMS 4500?

One of the most exciting features available with iVMS 4500 is the ability to view live video. However, you must set up your video management software in order to receive live video. Therefore, This section will walk you through how to properly set up iVMS 4500 for live viewing.

Begin setting up the iVMS 4500 for local devices like DVRs, NVRs, and cameras by opening the Device Management Interface and selecting the Devices option. A new screen will display; choose the + button to add a new local device, then press the Manual Adding button in the upper right corner. Enter all of the information needed to add the DVR, NVR, or camera here.

If the device is successfully added, the software may retrieve the device's camera information. So, after adding the devices, just click the "Start Live View" button to begin remote viewing of your camera. Then, to return to the Device Management Interface, click Devices again. There will be a display of the successfully inserted new device.

Moreover, in the Device Management Interface, select a device and click the device item to view its parameters. Thereafter, click the Edit option and then modify the parameters of the device according to actual needs. Lastly, click Save to save the modification or you can click Cancel to cancel the modification. However, to your surprise up to 256 devices can be added and viewed on the iVMS 4500.

How to download iVMS 4500 on PC?

It is rather simple to download iVMS 4500 to your PC, but you should be aware of a few considerations. Those using Windows OS can download the app by using an Android emulator. So if you’re using Windows OS then, start by downloading the most recent version of the Android emulator. Use the Bluestacks emulator, which is a free tool to be downloaded. Following that, once the emulator has been installed, you can begin downloading the iVMS 4500 APK from the emulator's Google Play Store. On the other hand, you can also download and save the iVMS 4500 setup file to your computer. The downloaded file will be in ZIP format, so you must extract it before installing it on your computer.

How to install iVMS 4500 on PC?

After you have extracted the iVMS 4500 setup file, double-click it and it will prompt you for administrator permission. Simply click the Yes button which will lead you to the next screen, where you will be asked to abide by the Terms and Conditions. Accept it and press the Next button. Following that, a new page will appear, prompting you to select one of the three options: Client, Storage Server, or Media Streaming Server. The client is the main piece of software used to monitor and set up your CCTV cameras. Simply choose it and press the Next button. The installation procedure will now begin. Sit back and wait for it to be completed. Once it’s done. It is now time to add your cameras to the application!

How to configure iVMS 4500 on PC?

Many users have recently shown an interest in running iVMS-4500 on a PC; thus, we will discuss iVMS-4500 configuration steps in this section. First, install Bluestacks on your computer. Then, simply follow the simple step-by-step installation procedure to get the application installed on your device. To start the emulator, double-click the Bluestacks application icon. Launch the Play Store from the home screen. You may be needed to sign in to your Google account in order to access Google Play. Then, in the search box, type iVMS 4500 app and click the Install option. Open the iVMS 4500 App and connect a Hikvision DVR, NVR, CCTV/IP Camera to it. To do so, navigate to the Menu and then choose the Devices option from the list that displays on your screen. After selecting the + symbol, choose Manual Adding. If your firm has a static DVR, NVR, Hikvision CCTV Camera, or IP address, you may enter that information here. Once you've filled out all of the fields, click the Save symbol in the top right corner. You will be able to watch live videos after entering the information. Moreover, selecting Live View from the menu section will take you to the live view. Add the CCTV cameras you wish to monitor now. Go to the Menu and choose Remote Playback to view prior video recordings. As a result, all live video feeds from multiple cameras can be effortlessly handled from a single location using this application.

How to login iVMS 4500?

Launch iVMS 4500 on your iPhone or Android phone, then select Hik-Connect in the top left corner. The Hik-Connect service login page will be shown. There, click Login, but if you haven't previously registered with the service, click Register and follow the onscreen instructions to create an account and then login.

How to install iVMS 4500 on Smart TV?

If you are someone who has been looking for a method to use your TV in conjunction with your security system, then all you have to do is follow the steps for installing this app. iVMS 4500 allows users to control up to four different video cameras from one central location and view them on a single monitor. Through this application, you can function as if you were sitting at a monitoring station but directly from your TV screen. For doing so you just need to follow these simple steps. Firstly, download the most recent version of the iVMS 4500 from the web, as it will not be available on your Smart TV's Play Store. It is advised that you download the HD version of the software since it will be shown in a more appropriate manner rather than in portrait mode, which looks terrible. Secondly, download File Commander for Android on your TV, since it is available for download on the TV. Insert the USB stick into the TV and click the "Allow installing unknown apps" button in the TV's security settings. Thirdly, launch File Commander and go to the APK (Android app extension) on the USB stick. Then, install the iVMS 4500 app on your smart TV in the same way you would any other app. The app will not display on the primary home screen view by default because it is not designed for TV use. You may access the app via your TV's Settings or by downloading a custom launcher. Following that, choose Applications, then the iVMS 4500 app, and lastly, click Open.

The next step is difficult since the TV's remote control will be inoperable at this time. To bring up the points and move about, you must attach a USB mouse. Then, using the mouse, choose the Region and browse to the Devices section of the app to set up your camera. Another quirk is that you can't enter any information into the app's camera settings using the mouse or remote control at this point. So you have two options: plug in a USB keyboard or download Android TV Remote on your phone. You may connect the phone's Android TV Remote to the TV and enter all of the necessary settings using the keyboard on the phone. When setting the IP, it is advisable to utilise the DVR or NVR cameras' local IP address. All you need to do is repeat the settings if you can see the cameras on the phone. Enter the settings from your phone app into the iVMS 4500 for the TV. Then Save the settings with the mouse. Thereafter, on your smart TV, launch and use the iVMS 4500 app to view all of the cameras. There is visibility of the live view, playback, and other options. It will essentially function in the same way as the iVMS 4500 on the app.

However, because the TV runs on the Android platform, it is reasonable to suppose that all that is required is the installation of the iVMS 4200 app on the TV. That, however, is not the case. The iVMS 4200 is not technically supported by the Android TV platform, which is a modified version designed to function on bigger televisions. As a result, we employ iVMS 4500 for Smart TVs.

Why is the iVMS 4500 not working?

It is quite common for a software application to occasionally fail to function properly. But, of course, when this occurs, you must seek answers. So, if your iVMS 4500 connection fails, you must first examine and identify the problem before attempting to resolve it using the procedures outlined below:

Check to see whether your phone has coverage and internet access

One of the factors why the iVMS 4500 does not function properly is that your phone's internet connection is down. So, check the internet on your phone to see whether you can monitor your cameras remotely or not. To regain internet connectivity, you must first check that your phone is linked to an internet provider. You may also test your WiFi connection to confirm that it is strong and steady. After that, switch off your Wifi or cellular network on your mobile phone and try again to see if you can view your cameras.

Check if your iVMS 4500 App needs to be updated

Because it is out of date, your iVMS 4500 app may not be working properly. As a result, you must verify that your iPhone or Android smartphone is running the most recent version of the software. To solve this, update the software to the most recent version and then run it to determine whether the problem has been resolved.

Check that all of the settings are in place

Another reason your iVMS 4500 connection failed is that the app settings were incorrect. You must double-check the settings of your security system to address this issue. It should be done to ensure that everything is in order. To do so, go to the upper left corner and pick the Navigation tab, followed by the Device option. There , choose the relevant device and adjust the device details by clicking on the pencil sign in the top right. After that, click the IP address or DNS, and then double-check that the Username and Password are accurate. When you are done with it, check to see if you can now watch the cameras live on your app again or not.

Your external IP address may have changed, so you'll need to re-configure it

It's likely that you're using an external IP address rather than the DNS. So in case your external IP address changes, you will no longer be able to see your cameras if you use the previous IP address. Therefore, you should be aware that the vast majority of internet service providers assign dynamic IP numbers to their customers. However, to resolve the problem, visit the location where your CCTV system is located and connect it to your WiFi network. Then, Google "What is my IP address?" and compare it to the IP address listed in your iVMS 4500 setup settings, which is a 9-digit number. Finally, update the IP address to the new one and then execute the programme.

Connect your network cable

You may be completely ignorant that your network or internet cable has been severed. Check to see if any of the cords leading to the DVR/NVR or the router have come loose. Everything else should be double-checked as well. The Ethernet cable connector, for example, should be correctly linked.

Check that the port forwarding is set up accurately

Another thing to check if a connection fails on iVMS is that the port forwarding is correct and that the ports are open. You should be aware that the ports on your router may be opened manually, or you can use the UPnP option on your recorder to open the ports automatically. In most instances, the biggest connection problem comes when the server port is not active, signalling that the port is closed. To remedy this, you may need to switch to a different port. However, it is recommended that you change the http port to 82 or anything else, or that you change the server port to 8001.

You may need to update the firmware on your Recorder/Camera

If you are experiencing connection failure with the iVMS 4500, it might be due to a firmware issue. Previously, certain firmware had problems with the UPnP functionality, leading the ports to become dormant on their own. As a result, make sure your recorder/camera is up to date.

If you have problems with your iVMS 4500, do not worry! Most of the time there are easy fixes and ways to get it back up and running again. We've provided some basic troubleshooting steps above that you can follow to get your system working properly again. If that doesn't work, seek professional help and contact your seller directly for further assistance.

How to use iVMS 4500?

Hikvision iVMS-4500 is a video management software that comes with easy to use features. This software can be used to manage multiple channels at the same time and has a detailed interface. This guide will describe in detail how the iVMS 4500 performs useful tasks. The first step after installing and activating the software iVMS 4500 is to add a Hikvision CCTV Camera/DVR/NVR/IP Camera to your application. To do so, click the Menu symbol in the upper left corner. Then, in the top right corner, click Devices, followed by a press on the Add button. Next, select Manual Adding. You are now adding your Hikvision CCTV Camera/DVR/NVR to the iVMS 4500. After entering the data, remember to click the Save icon in the top right corner. Don't be concerned about Camera No. as it will change automatically once you have entered all the correct information. You may begin viewing Live View by clicking the Start Live View button. Alternatively, you may click the top left Menu button, then the Live View symbol. Now, in the following step, pick the CCTV Cameras you wish to see, and you should be able to see the live view presently. However, to view the remote Playback Records, first click the top left Menu icon, then Remote Playback. After that, choose the relevant start and end durations for watching the playback video records, and then select the cameras you want to view. You are now ready to view the remote playback recordings.

Furthermore, you may leverage iVMS 4500 to do a range of tasks. For instance, you might use it to swap between cameras in live view. To do so, click the Camera icon to bring up a list of your cameras. Select your camera from the list of cameras that appears by clicking the box and hitting live view. If you have more than four cameras, the little disc will show you the number of camera pages you have. To view a camera in full screen mode, swipe between pages and tap on it. You might be wondering what the buttons in the Live View window imply. Allow us to lead you through the process. A drop down box will open, select Devices, and five icons will show.

Using the camera icon, you may snap a picture and save it to your phone's pictures. In contrast, the iconic recorder is used to record a video and keep it in your phone's films. The third icon on the same list is used to activate Pan Tilt Zoom Controls, and the fourth screen icon is used for changing the kind of stream (usually it should be kept on fluent). Finally, the fifth icon is used to terminate Live View. Wait! There's even more! Swipe the buttons to the right to bring up more options. You may use them to pause playback, start and stop listening, use the microphone, and digital zoom. As previously stated, there is a Pan Tilt Zoom button. By pushing the joystick, you may activate the PTZ controls. It rotates the camera 360 degrees, displaying zoom controls, focusing the image, and preset position controls. Make sure you've clicked the joystick button before moving the first camera. Then, using your finger on the screen, drag the camera in the direction you want it to travel. Green arrows will show on the screen, indicating that the message was successfully sent. If you are not at the farm, you may have to wait a second or two for the camera to get the instruction.

Furthermore, you may zoom in the same way by pinching and unpinching your fingers on the screen, or by using the zoom controls. Hikvision iVMS 4500 comes with a plethora of helpful functions, so feel free to experiment with it. You can be assured that everything you do on the iVMS 4500 will have no effect on the CCTV camera!

How to activate iVMS 4500?

To activate iVMS 4500 just download it from the PlayStore (if you are using an Android device) or from the Apple Store (if you are using an Apple device) and set up the local Hikvision devices such as DVRs/ NVRs or cameras for remote view. Moreover, the process of iVMS 4500 activation is pretty simple. All you have to do is download and install the Hikvision iVMS 4500 app and click Open to run it. However, you’d need to register yourself first as a user and then begin to use it for remote monitoring. But if you already have an account, then simply login using your credentials.

How to add device iVMS 4500?

Hikvision iVMS 4500 has a lot of devices that can be added. The most common ones are video encoders and decoders, PTZ cameras, DVRs, switchers and servers. If you wish to add a device to iVMS 4500, you must know two things: the device type and the device's IP address. To begin, click the Settings icon and then pick Folder to open the Device Management interface. There, click the Plus icon to add a new device and give it a name if desired. Then pick HiDDNS, IP/Domain, or IP server as the registration mode. After that, enter the Username and Password for the newly added device. When the device is online after being successfully added, the number of cameras beneath the device may be accessed. Finally, press the Save icon to confirm the changes. Click Devices once again to return to the Device Management interface. The newly added device will be shown in the Device Management interface after it has been successfully added.

How to delete device iVMS 4500?

It may be essential to erase a device from the programme at times, and this section describes how to go about it. To do so, pick a device in the Device Management interface, click the Delete icon, and then touch the Confirm button in the pop-up dialogue box to delete the device. That's all! You have deleted a device from the Hikvision iVMS 4500.